Brass Reducing Sockets
A brass reducing socket is a brass fitting with two female-threaded ends that joins two male-threaded pipes or parts of different sizes in a straight line.
It is used in water lines where the size changes, between a valve and a pipe of a different size and at device outlets. Sizes and stock vary by model.
Main Applications
- Transitions in water lines where the size changes
- Connecting a valve to a pipe of a different size
- Size reduction at device outlets
- Equipment connections in compressed air lines
- Size changes at combi boiler connections
- Joining pipes of different sizes in renovations
Technical Data
| Fitting type | Reducing socket, two female-threaded ends |
|---|---|
| Thread | ISO 228-1 G parallel female thread (depending on model) |
| Sizes | Depending on model, please ask |
| Material | Brass CW617N (similar manufacturer sheet; depending on model) |
| Nominal pressure | PN16 (similar manufacturer sheet) |
| Max. working temperature | 160 °C (similar manufacturer sheet) |
| Surface | Natural brass |
| Male-female transition | With a brass reducing bush |
| Equal-size type | With a brass socket |
| Installation | With thread sealing tape, hemp or sealant |
| Production | Machined from bar or forged (depending on model) |
| Media | Water, heating water, compressed air |
Material Options
| Part | Brass | Nickel-plated brass | Stainless (AISI 304) |
|---|---|---|---|
| Body | Brass CW617N (depending on model) | Brass body, nickel plated (depending on model) | AISI 304 stainless steel |
| Surface | Natural brass | Nickel plating | Uncoated stainless |
| Thread | ISO 228-1 G female thread, two sizes (depending on model) | Depending on model | ISO 7-1 |
| Pressure rating | PN16, max. 160 °C (similar manufacturer sheet) | Depending on model | 20 bar −20…+38 °C (ISO 4144) |
| Suitable media | Domestic water, heating water, compressed air | Visible fixture connections | Food, chemicals, seawater |
Which material? Reducing sockets are used for size transitions on brass lines; on galvanized or stainless lines a fitting of the same material should be chosen.
Advantages
Transition in One Piece
- One body instead of a socket and reducer
Straight Line
- The transition stays on the pipe axis
Easy Installation
- Both ends female, screws on directly
No Rust
- Brass body
Construction and Design Features
- Two female-threaded ends of different sizes on the same axis
- Stepped internal transition
- Brass body (depending on model)
- Installation without welding
Send the large and small size and the quantity; we will confirm the suitable reducing socket and stock.
How to Choose?
- Measure both sizesDetermine the sizes of the large and small male ends to be joined.
- Choose the fittingUse a reducing socket if both sides are male, a reducing bush if one side is a female port.
- Write the sizeGive the large size before the small size in the order.
- Confirm the mediumChoose brass for water, heating and air.
Complementary Products
Why ORFA?
Other Brass Fittings
Straight Radiator Unions
Straight radiator unions are brass fittings that connect a radiator to the pipework in a straight line and can be taken apart.
Details →
Angle Radiator Unions
Angle radiator unions are brass fittings that connect a radiator to the pipework at a right angle and can be taken apart.
Details →
PEX Fittings
PEX fittings are brass fittings used to connect PEX pipes to the installation or to fixtures.
Details →
Quick Couplings
Quick couplings let hoses and lines be connected and disconnected quickly without tools.
Details →
Brass Hose Fittings
Brass hose fittings are used to connect a hose to a threaded installation.
Details →
Brass 45° Elbows
Brass 45° elbows are brass fittings used to change direction by 45 degrees on threaded installations.
Details →
Brass Tank Connectors
Brass tank connectors are used to take a sealed pipe outlet through the wall of a tank.
Details →
Brass Elbows
Brass elbows are brass fittings used to change direction by 90 degrees on threaded installations.
Details →
Brass Hose Connectors
Brass hose connectors are used to join two hoses or to join a hose to a line.
Details →
Brass Conical Unions
Brass conical unions provide a tight, removable connection on threaded pipes through a conical seat.
Details →
Brass Plugs and Caps
Brass plugs and caps are used to close the ends of threaded pipes and fittings.
Details →
Brass Crosses
Brass crosses are brass fittings that split flow in four directions on threaded installations.
Details →
Brass Street Elbows
Brass street elbows are brass elbows with one female and one male threaded end.
Details →
Brass Sockets
Brass sockets are female threaded brass fittings that join two pipes in a straight line.
Details →
Brass Nipples
Brass nipples are brass pieces with male threads on both ends that connect two female threaded fittings.
Details →
Brass Reducing Nipples
Brass reducing nipples are brass pieces with male threads of different sizes on each end, used to change pipe size.
Details →
Brass Reducing Bushes
Brass reducing bushes are brass fittings with male and female threads used to change pipe size.
Details →
Brass Tees
Brass tees are brass fittings that split flow in three directions on threaded installations.
Details →
Brass Hex Nipples
Brass hex nipples are brass fittings with a hexagon centre, used to join two threaded parts.
Details →
Brass Compression Fittings
Brass compression fittings join copper and similar pipes with a compression ring, without welding or threading.
Details →Get a quote for your project
Our sales team will prepare the best solution for your needs.