PPRC 45° Elbows
A PPR 45° elbow is a wide-angle welded plastic elbow that turns a PP-R line by 45 degrees.
It is used to pass obstacles, offset lines with two elbows and on routes where low flow loss is wanted. It is supplied in 8 sizes from Ø20 to Ø110 mm.
Main Applications
- Passing beams and columns
- Line offsets with two elbows
- Sloped installation routes
- Angled connections at manifold outlets
- Low-loss distribution lines
Technical Data
| Fitting type | 45° elbow |
|---|---|
| Material | PP-R (depending on model) |
| Sizes | Ø20, 25, 32, 40, 50, 63, 75, 110 mm (product range) |
| Connection | Socket fusion welding |
| Pressure class | Depending on model |
| Operating temperature | Depending on application class |
| Ø90 | Please ask |
| 90° turn | With a PPR elbow |
Material Options
| Part | PPR (PP-R) | U-PVC | Brass |
|---|---|---|---|
| Body | Polypropylene random copolymer | Rigid PVC | Brass CW617N (similar manufacturer sheet) |
| Connection | Socket fusion welding | Solvent cement or thread | Thread |
| Hot water | Suitable (depending on application class) | Not suitable | Suitable |
| Threaded transition | Brass threaded insert (depending on model) | Plastic or brass thread | Direct thread |
| Use | Hot and cold domestic water, heating | Cold clean water, chemicals | Water, heating, air |
Which material? For offsets and passing obstacles two 45° elbows cause less flow loss than one 90° elbow; on hot water lines they are chosen in the same material class as the pipe.
Advantages
Low Flow Loss
- Wide-angle turn
Easy Offset
- The line is shifted with two elbows
8 Sizes
- From Ø20 to Ø110 mm
Welded Body
- Leak-free turn
Construction and Design Features
- Two welding sockets at 45°
- One-piece PP-R body
- Socket matching the pipe size
- Gasket-free connection
Send the 45° elbow size and quantity; we will confirm the suitable PPR 45° elbow from stock.
How to Choose?
- Determine the angleChoose a 45° elbow for obstacles and offsets.
- Read the sizeDetermine the PP-R pipe outside diameter.
- Calculate the offset lengthThe pipe length between two elbows sets the offset.
- Plan the weldMark the elbow direction before welding.
Complementary Products
Why ORFA?
Other PPRC Fittings
PPRC Crossover Bends
PPRC crossover bends are curved fittings used to pass over another pipe on PPRC lines.
Details →
PPRC Double Pipe Clips
PPRC double pipe clips fix two PPRC pipes side by side to a wall or support.
Details →
PPRC Male Threaded Elbows
PPRC male threaded elbows turn a PPRC pipe into a male threaded connection at a right angle.
Details →
PPRC Male Threaded Plugs
PPRC male threaded plugs close female threaded outlets temporarily or permanently.
Details →
PPRC Male Threaded Swivel Unions
PPRC male threaded swivel unions connect a PPRC pipe to a male threaded fitting in a removable way.
Details →
PPRC Male Threaded Adaptors
PPRC male threaded adaptors move a PPRC pipe to a male threaded connection in a straight line.
Details →
PPRC Male Threaded Tees
PPRC male threaded tees are used to take a male threaded branch off a PPRC line.
Details →
PPRC Elbows
PPRC elbows are fusion-welded fittings that change direction by 90 degrees on PPRC pipelines.
Details →
PPRC Swivel Elbows
PPRC swivel elbows can be turned during fitting and move a PPRC line to a threaded connection.
Details →
PPRC Female Threaded Elbows
PPRC female threaded elbows turn a PPRC pipe into a female threaded connection at a right angle.
Details →
PPRC Female Threaded Swivel Unions
PPRC female threaded swivel unions connect a PPRC pipe to a female threaded fitting in a removable way.
Details →
PPRC Female Threaded Adaptors
PPRC female threaded adaptors move a PPRC pipe to a female threaded connection in a straight line.
Details →
PPRC Female Threaded Tees
PPRC female threaded tees are used to take a female threaded branch off a PPRC line.
Details →
PPRC Reducing Tees
PPRC reducing tees are fusion-welded fittings used to take a smaller branch off a PPRC line.
Details →
PPRC End Caps
PPRC end caps are used to close the ends of PPRC pipes by fusion welding.
Details →
PPRC Welding Machines and Tools
PPRC welding machines and tools are used to heat-fuse, cut and prepare PPRC pipes and fittings.
Details →
PPRC Weld-End Conical Unions
PPRC weld-end conical unions create a tight, removable joint on PPRC lines.
Details →
PPRC Stub Ends
PPRC stub ends prepare the end of a PPRC pipe for a flanged connection.
Details →
PPRC Couplers
PPRC couplers join two PPRC pipes in a straight line by fusion welding.
Details →
PPRC Reducers
PPRC reducers are fusion-welded fittings used to change pipe size on PPRC lines.
Details →
PPRC Tees
PPRC tees are fusion-welded fittings that split flow in three directions on PPRC pipelines.
Details →
PPRC Single Pipe Clips
PPRC single pipe clips fix a PPRC pipe to a wall or support.
Details →
PVC Tank Connectors
PVC tank connectors are used to take a sealed pipe outlet through the wall of a plastic tank.
Details →Get a quote for your project
Our sales team will prepare the best solution for your needs.