PPRC Swivel Elbows
A PPR swivel elbow is a detachable 90° elbow with one end welded to PP-R pipe and a rotating nut at the other end that connects to a device without turning the pipe.
It is used for the bottom connections of wall-mounted devices such as combi boilers, water heaters and meters. Combi boiler connection sets are also in this group; sizes and stock vary by model.
Main Applications
- Combi boiler bottom connections
- Water heater connections
- Meter groups
- Wall-mounted devices
- Detachable turns in tight spaces
Technical Data
| Fitting type | Swivel (union) elbow |
|---|---|
| Material | PP-R weld end, brass nut (depending on model) |
| Sizes | Depending on model, please ask |
| Combi boiler connection sets | Angled and straight, 8-piece set (product range) |
| Sealing | With a gasket (depending on model) |
| Pressure and temperature | Depending on model and application class |
| Straight type | With a PPR swivel union |
| Connection | Weld + rotating nut |
Material Options
| Part | PPR (PP-R) | U-PVC | Brass |
|---|---|---|---|
| Body | Polypropylene random copolymer | Rigid PVC | Brass CW617N (similar manufacturer sheet) |
| Connection | Socket fusion welding | Solvent cement or thread | Thread |
| Hot water | Suitable (depending on application class) | Not suitable | Suitable |
| Threaded transition | Brass threaded insert (depending on model) | Plastic or brass thread | Direct thread |
| Use | Hot and cold domestic water, heating | Cold clean water, chemicals | Water, heating, air |
Which material? On combi boiler connections swivel elbows and sets allow removal when the device is replaced without touching the pipework; gaskets should be checked after removal.
Advantages
Practical Under Devices
- Detachable 90° turn
Ready-Made Sets
- Combi boiler connection sets
Pipe Does Not Turn
- Rotating nut
Gasketed Seal
- No tape needed
Construction and Design Features
- 90° weld body and rotating nut
- Gasket inside the nut
- Brass nut (depending on model)
- Detachable set
Send the device connection size, pipe size and quantity; we will confirm a suitable swivel elbow or boiler set.
How to Choose?
- Measure the device connectionDetermine the thread of the boiler or device port.
- Decide set or singleA ready set is practical for boiler installation.
- Match the pipe sizeDetermine the PP-R size.
- Check the gasketMake sure the gasket is in place before installation.
Complementary Products
Why ORFA?
Other PPRC Fittings
PPRC 45° Elbows
PPRC 45° elbows are fusion-welded fittings that change direction by 45 degrees on PPRC pipelines.
Details →
PPRC Crossover Bends
PPRC crossover bends are curved fittings used to pass over another pipe on PPRC lines.
Details →
PPRC Double Pipe Clips
PPRC double pipe clips fix two PPRC pipes side by side to a wall or support.
Details →
PPRC Male Threaded Elbows
PPRC male threaded elbows turn a PPRC pipe into a male threaded connection at a right angle.
Details →
PPRC Male Threaded Plugs
PPRC male threaded plugs close female threaded outlets temporarily or permanently.
Details →
PPRC Male Threaded Swivel Unions
PPRC male threaded swivel unions connect a PPRC pipe to a male threaded fitting in a removable way.
Details →
PPRC Male Threaded Adaptors
PPRC male threaded adaptors move a PPRC pipe to a male threaded connection in a straight line.
Details →
PPRC Male Threaded Tees
PPRC male threaded tees are used to take a male threaded branch off a PPRC line.
Details →
PPRC Elbows
PPRC elbows are fusion-welded fittings that change direction by 90 degrees on PPRC pipelines.
Details →
PPRC Female Threaded Elbows
PPRC female threaded elbows turn a PPRC pipe into a female threaded connection at a right angle.
Details →
PPRC Female Threaded Swivel Unions
PPRC female threaded swivel unions connect a PPRC pipe to a female threaded fitting in a removable way.
Details →
PPRC Female Threaded Adaptors
PPRC female threaded adaptors move a PPRC pipe to a female threaded connection in a straight line.
Details →
PPRC Female Threaded Tees
PPRC female threaded tees are used to take a female threaded branch off a PPRC line.
Details →
PPRC Reducing Tees
PPRC reducing tees are fusion-welded fittings used to take a smaller branch off a PPRC line.
Details →
PPRC End Caps
PPRC end caps are used to close the ends of PPRC pipes by fusion welding.
Details →
PPRC Welding Machines and Tools
PPRC welding machines and tools are used to heat-fuse, cut and prepare PPRC pipes and fittings.
Details →
PPRC Weld-End Conical Unions
PPRC weld-end conical unions create a tight, removable joint on PPRC lines.
Details →
PPRC Stub Ends
PPRC stub ends prepare the end of a PPRC pipe for a flanged connection.
Details →
PPRC Couplers
PPRC couplers join two PPRC pipes in a straight line by fusion welding.
Details →
PPRC Reducers
PPRC reducers are fusion-welded fittings used to change pipe size on PPRC lines.
Details →
PPRC Tees
PPRC tees are fusion-welded fittings that split flow in three directions on PPRC pipelines.
Details →
PPRC Single Pipe Clips
PPRC single pipe clips fix a PPRC pipe to a wall or support.
Details →
PVC Tank Connectors
PVC tank connectors are used to take a sealed pipe outlet through the wall of a plastic tank.
Details →Get a quote for your project
Our sales team will prepare the best solution for your needs.