PPRC Crossover Bends
A PPR crossover (socketed bend) is a curved welded fitting that lets a PP-R line pass over another pipe crossing in the same plane.
It is used where cold and hot water lines cross in concealed and in-floor installations. The store stocks Ø20 and Ø32 mm sizes.
Main Applications
- Crossing points of concealed lines
- In-floor installation crossings
- Bathroom and kitchen distribution
- Crossing lines at manifold outlets
- Passing over an existing line in renovations
Technical Data
| Fitting type | Socketed bend (crossover) |
|---|---|
| Material | PP-R (depending on model) |
| Sizes | Ø20, Ø32 mm (product range) |
| Other sizes | Please ask |
| Connection | Socket fusion welding |
| Pressure class | Depending on model |
| Operating temperature | Depending on application class |
| Bend | Both ends on the same axis, curved middle section |
Material Options
| Part | PPR (PP-R) | U-PVC | Brass |
|---|---|---|---|
| Body | Polypropylene random copolymer | Rigid PVC | Brass CW617N (similar manufacturer sheet) |
| Connection | Socket fusion welding | Solvent cement or thread | Thread |
| Hot water | Suitable (depending on application class) | Not suitable | Suitable |
| Threaded transition | Brass threaded insert (depending on model) | Plastic or brass thread | Direct thread |
| Use | Hot and cold domestic water, heating | Cold clean water, chemicals | Water, heating, air |
Which material? A crossover replaces a crossing made with four elbows with one piece; it reduces the number of welds and leak risk in concealed work.
Advantages
One Piece Instead of Four Elbows
- Fewer welds
Suited to Concealed Work
- Slim bend profile
Fast Installation
- Crossing with two welds
Leak-Free
- Single body by welding
Construction and Design Features
- Two welding sockets on the same axis
- Curved bridge in the middle
- One-piece PP-R
- Gasket-free
Send the pipe size and quantity; we will confirm a suitable PPR crossover from stock.
How to Choose?
- Identify the crossing pointDecide which line passes over.
- Read the sizeDetermine the PP-R pipe size of the crossing line.
- Check the bend heightMake sure the pipe underneath fits under the bend.
- Ask about stockAsk for the lead time of sizes other than Ø20 and Ø32.
Complementary Products
Why ORFA?
Other PPRC Fittings
PPRC 45° Elbows
PPRC 45° elbows are fusion-welded fittings that change direction by 45 degrees on PPRC pipelines.
Details →
PPRC Double Pipe Clips
PPRC double pipe clips fix two PPRC pipes side by side to a wall or support.
Details →
PPRC Male Threaded Elbows
PPRC male threaded elbows turn a PPRC pipe into a male threaded connection at a right angle.
Details →
PPRC Male Threaded Plugs
PPRC male threaded plugs close female threaded outlets temporarily or permanently.
Details →
PPRC Male Threaded Swivel Unions
PPRC male threaded swivel unions connect a PPRC pipe to a male threaded fitting in a removable way.
Details →
PPRC Male Threaded Adaptors
PPRC male threaded adaptors move a PPRC pipe to a male threaded connection in a straight line.
Details →
PPRC Male Threaded Tees
PPRC male threaded tees are used to take a male threaded branch off a PPRC line.
Details →
PPRC Elbows
PPRC elbows are fusion-welded fittings that change direction by 90 degrees on PPRC pipelines.
Details →
PPRC Swivel Elbows
PPRC swivel elbows can be turned during fitting and move a PPRC line to a threaded connection.
Details →
PPRC Female Threaded Elbows
PPRC female threaded elbows turn a PPRC pipe into a female threaded connection at a right angle.
Details →
PPRC Female Threaded Swivel Unions
PPRC female threaded swivel unions connect a PPRC pipe to a female threaded fitting in a removable way.
Details →
PPRC Female Threaded Adaptors
PPRC female threaded adaptors move a PPRC pipe to a female threaded connection in a straight line.
Details →
PPRC Female Threaded Tees
PPRC female threaded tees are used to take a female threaded branch off a PPRC line.
Details →
PPRC Reducing Tees
PPRC reducing tees are fusion-welded fittings used to take a smaller branch off a PPRC line.
Details →
PPRC End Caps
PPRC end caps are used to close the ends of PPRC pipes by fusion welding.
Details →
PPRC Welding Machines and Tools
PPRC welding machines and tools are used to heat-fuse, cut and prepare PPRC pipes and fittings.
Details →
PPRC Weld-End Conical Unions
PPRC weld-end conical unions create a tight, removable joint on PPRC lines.
Details →
PPRC Stub Ends
PPRC stub ends prepare the end of a PPRC pipe for a flanged connection.
Details →
PPRC Couplers
PPRC couplers join two PPRC pipes in a straight line by fusion welding.
Details →
PPRC Reducers
PPRC reducers are fusion-welded fittings used to change pipe size on PPRC lines.
Details →
PPRC Tees
PPRC tees are fusion-welded fittings that split flow in three directions on PPRC pipelines.
Details →
PPRC Single Pipe Clips
PPRC single pipe clips fix a PPRC pipe to a wall or support.
Details →
PVC Tank Connectors
PVC tank connectors are used to take a sealed pipe outlet through the wall of a plastic tank.
Details →Get a quote for your project
Our sales team will prepare the best solution for your needs.