PPRC Tees
A PPR tee is a plastic fitting with three welding sockets used to take a branch of the same size from a PP-R line.
It is used for in-house distribution, riser branches and manifold outlets. Nine sizes are available, from Ø20 up to Ø110 mm.
Main Applications
- In-house hot and cold water distribution
- Riser and floor branches
- Manifold outlets
- Heating supply branches
- Irrigation distribution
Technical Data
| Fitting type | Equal tee, three welding sockets |
|---|---|
| Material | PP-R (depending on model) |
| Sizes | Ø20, 25, 32, 40, 50, 63, 75, 90, 110 mm (product range) |
| Connection | Socket fusion welding |
| Pressure class | Depending on model |
| Operating temperature | Depending on application class |
| Branch of a different size | With a PPR reducing tee |
| Threaded branch | With a PPR female / male threaded tee |
Material Options
| Part | PPR (PP-R) | U-PVC | Brass |
|---|---|---|---|
| Body | Polypropylene random copolymer | Rigid PVC | Brass CW617N (similar manufacturer sheet) |
| Connection | Socket fusion welding | Solvent cement or thread | Thread |
| Hot water | Suitable (depending on application class) | Not suitable | Suitable |
| Threaded transition | Brass threaded insert (depending on model) | Plastic or brass thread | Direct thread |
| Use | Hot and cold domestic water, heating | Cold clean water, chemicals | Water, heating, air |
Which material? A reducing tee is chosen for a smaller branch and a threaded tee if a fixture connection is needed; the equal tee is for distributing pipes of the same size.
Advantages
Branch in One Piece
- No extra fittings needed
Tight by Welding
- Gasket-free connection
9 Sizes
- From Ø20 to Ø110 mm
Light
- Easy handling and installation
Construction and Design Features
- Three welding sockets of the same size
- Branch perpendicular to the main line
- One-piece PP-R body
- Gasket-free connection
Send the tee size and quantity; we will confirm PPR tees from stock.
How to Choose?
- Read the main line sizeMeasure the outside diameter of the PP-R pipe in mm.
- Check the branchUse a reducing tee for a smaller branch.
- Determine fixture needsChoose a threaded tee if a threaded outlet is needed.
- Plan the welding orderMake the three welds in turn, keeping them aligned.
Complementary Products
Why ORFA?
Other PPRC Fittings
PPRC 45° Elbows
PPRC 45° elbows are fusion-welded fittings that change direction by 45 degrees on PPRC pipelines.
Details →
PPRC Crossover Bends
PPRC crossover bends are curved fittings used to pass over another pipe on PPRC lines.
Details →
PPRC Double Pipe Clips
PPRC double pipe clips fix two PPRC pipes side by side to a wall or support.
Details →
PPRC Male Threaded Elbows
PPRC male threaded elbows turn a PPRC pipe into a male threaded connection at a right angle.
Details →
PPRC Male Threaded Plugs
PPRC male threaded plugs close female threaded outlets temporarily or permanently.
Details →
PPRC Male Threaded Swivel Unions
PPRC male threaded swivel unions connect a PPRC pipe to a male threaded fitting in a removable way.
Details →
PPRC Male Threaded Adaptors
PPRC male threaded adaptors move a PPRC pipe to a male threaded connection in a straight line.
Details →
PPRC Male Threaded Tees
PPRC male threaded tees are used to take a male threaded branch off a PPRC line.
Details →
PPRC Elbows
PPRC elbows are fusion-welded fittings that change direction by 90 degrees on PPRC pipelines.
Details →
PPRC Swivel Elbows
PPRC swivel elbows can be turned during fitting and move a PPRC line to a threaded connection.
Details →
PPRC Female Threaded Elbows
PPRC female threaded elbows turn a PPRC pipe into a female threaded connection at a right angle.
Details →
PPRC Female Threaded Swivel Unions
PPRC female threaded swivel unions connect a PPRC pipe to a female threaded fitting in a removable way.
Details →
PPRC Female Threaded Adaptors
PPRC female threaded adaptors move a PPRC pipe to a female threaded connection in a straight line.
Details →
PPRC Female Threaded Tees
PPRC female threaded tees are used to take a female threaded branch off a PPRC line.
Details →
PPRC Reducing Tees
PPRC reducing tees are fusion-welded fittings used to take a smaller branch off a PPRC line.
Details →
PPRC End Caps
PPRC end caps are used to close the ends of PPRC pipes by fusion welding.
Details →
PPRC Welding Machines and Tools
PPRC welding machines and tools are used to heat-fuse, cut and prepare PPRC pipes and fittings.
Details →
PPRC Weld-End Conical Unions
PPRC weld-end conical unions create a tight, removable joint on PPRC lines.
Details →
PPRC Stub Ends
PPRC stub ends prepare the end of a PPRC pipe for a flanged connection.
Details →
PPRC Couplers
PPRC couplers join two PPRC pipes in a straight line by fusion welding.
Details →
PPRC Reducers
PPRC reducers are fusion-welded fittings used to change pipe size on PPRC lines.
Details →
PPRC Single Pipe Clips
PPRC single pipe clips fix a PPRC pipe to a wall or support.
Details →
PVC Tank Connectors
PVC tank connectors are used to take a sealed pipe outlet through the wall of a plastic tank.
Details →Get a quote for your project
Our sales team will prepare the best solution for your needs.