Engineering Calculators

Free online calculators for steam trap capacity, pump head, pipe thermal expansion and steam pipe sizing — ORFA Industrial. All tools run in your browser; no data is stored.

Steam Trap Sizing CalculatorCalculate steam trap capacity from condensate load, safety factor, differential pressure and flash steam ratio, with a suggested trap type for your application.
Pump Head (Total Dynamic Head) CalculatorCalculate total dynamic head and required shaft power from flow rate, pipe diameter, length, static height and minor losses.
Pipe Thermal Expansion and Expansion Joint CalculatorCalculate thermal expansion and contraction of steel, stainless, copper, PPR, PVC and PE pipes and the required expansion joint movement.
Steam Pipe Sizing CalculatorSize steam pipes from steam flow, line pressure and target velocity; get the suggested DN size and estimated pressure drop.
Valve Kv / Kvs CalculatorCalculate the control valve Kv for water and saturated steam; get the recommended standard Kvs and see whether the steam flow is critical.
Heat Exchanger Pre-Sizing Calculator (LMTD)Calculate heat exchanger flow rates, log mean temperature difference and required heat transfer area from heat duty and primary/secondary temperatures.
Pipe Pressure Drop Calculator (Water)Calculate velocity, pressure loss per metre (Pa/m) and total friction loss in water pipes from flow rate, inner diameter, length, material and temperature.
Water Pipe Sizing CalculatorFind the required inner diameter and DN size from flow rate and target water velocity; see the velocity and pressure loss per metre in the selected size.
Engineering Unit ConverterConvert pressure (bar, psi, mH₂O, kPa), flow (m³/h, l/s, GPM), power (kW, kcal/h, BTU/h, HP), temperature and volume units instantly.