Magnetic Level Transmitter
A magnetic level transmitter detects the position of a magnetic float through reed contacts and a resistor chain along a rod and converts it into a continuous analogue signal. The level read by eye on the indicator can then be sent to a PLC, SCADA or control panel.
It can be clamped to the chamber of a magnetic level indicator or mounted directly in the tank with its own float. The store range offers 1000 and 1500 mm models; the output can be taken as 4–20 mA or 0–10 V through a converter.
Main Applications
- Remote monitoring on tanks with magnetic indicators
- Continuous level on boilers and process tanks
- Level transfer to PLC and SCADA
- Fuel and chemical tanks with stock tracking
Technical Data
| Measuring principle | Reed contact chain and resistor divider |
|---|---|
| Mounting | On a magnetic indicator chamber or directly in the tank |
| Length | 1000 mm, 1500 mm (product range); per project |
| Output | 4–20 mA or 0–10 V (with converter) |
| Supply | 24 V DC (converter) |
| Resolution | By reed spacing (by model) |
| Temperature and pressure | By the indicator it is fitted to and by model |
| Signal cable | 0.75 mm² shielded cable recommended |
Material Options
| Part | Magnetic transmitter |
|---|---|
| Measuring rod | By model (stainless or aluminium profile) |
| Sensing | Reed contact chain |
| Electronics | Converter board |
| Connection | Indicator clamp or tank connection |
Which material? The transmitter must suit the magnet strength of the float used in the indicator; the measuring length is chosen to match the indicator’s centre-to-centre distance.
Advantages
Visual + Signal
- Indicator and transmitter together
Retrofit
- Fits an existing indicator
Continuous Measurement
- Whole range, not just points
Standard Signal
- 4–20 mA or 0–10 V
Construction and Design Features
- Measuring rod with reed contact chain
- Signal converter electronics
- Clamps for fitting to the indicator
- Cable junction box
Write the indicator’s centre-to-centre distance and required output; we will define the right transmitter length together.
How to Choose?
- Take the measuring lengthMeasure the indicator’s centre-to-centre distance.
- Choose the outputSelect 4–20 mA or 0–10 V.
- Check compatibilityConfirm the float magnet suits the transmitter.
- Plan the wiringConnect to the panel with shielded cable.
Complementary Products
Why ORFA?
Other Level Control Devices
Alarm and Remote Monitoring Devices
Alarm and remote monitoring devices report the level status in tanks and wells by audible, visual or remote notification.
Details →
Glass Tube Level Gauge
Glass tube level gauges allow the liquid level inside a tank to be seen directly through a transparent glass tube.
Details →
Electric Level Float Switches
Electric level float switches float with the liquid level, change contact and operate a pump or alarm.
Details →
Hydrostatic Level Transmitters
Hydrostatic level transmitters measure level from the pressure of the liquid column and provide a continuous signal.
Details →Capacitive Level Sensors
Capacitive level sensors detect the level of liquids and solids by changes in capacitance.
Details →Solids Level Switches
Solids level switches detect the level of powder and granular materials in silos and bunkers.
Details →
Boiler Proportional Level Controllers
Boiler proportional level controllers continuously measure the water level in steam boilers and adjust the feed water proportionally.
Details →
Boiler Level Switches
Boiler level switches detect low and high water levels in steam boilers and control the burner, pump or alarm.
Details →
Boiler Feed Water Level Controls
Boiler feed water level controls start and stop the feed pump according to the water level in the steam boiler.
Details →
Magnetic Level Indicators
Magnetic level indicators show the tank level by transferring the movement of a magnetic float to external indicator flaps.
Details →
Stainless Steel Level Switch
Stainless steel level switches are float level switches with stainless steel bodies suitable for corrosive and hot liquids.
Details →
Plastic Level Switches
Plastic level switches are economical float switches used in water and mild chemical tanks.
Details →Radar Level Transmitters
Radar level transmitters measure the level of liquids and solids without contact and provide a continuous signal.
Details →
Reflex Glass Level Gauges
Reflex glass level gauges show the liquid level clearly in steam boilers and pressure vessels.
Details →
Level Indicators
Level indicators allow the liquid level in tanks and vessels to be monitored on site.
Details →
Level Control Panels and Sensors
Level control panels and sensors are control systems that automatically start and stop pumps according to the level in tanks and wells.
Details →
Liquid Level Electrodes
Liquid level electrodes detect the level of conductive liquids by electrode contact and send a signal to the level relay.
Details →
Float Level Switches
Float level switches change contact by means of a float moving with the liquid level and control a pump or alarm.
Details →Float Valves
Float valves open when the water level in a tank drops and close when it is full, keeping the level mechanically.
Details →
Tank Level Switches
Tank level switches signal at set levels in storage tanks to control filling, emptying and alarms.
Details →Get a quote for your project
Our sales team will prepare the best solution for your needs.